C64-dev/newLang/tests/compiler/counter-test.s

; E04-S07: compile COUNTER.N8, assign final code addresses, and write two
; deterministic PRGs. The generated code runs from the PRG in a second x128
; session; the fixture-owned wrapper places FRAME_FP and reports the program's
; `total` local through the mailbox.

.setcpu "6502"
.include "../../src/common/c128.inc"
.include "../../src/common/mailbox.inc"
.include "../../src/common/formats.inc"
.include "../../src/common/frames.inc"

.import mmu_init, mmu_bank0, mmu_shutdown
.import src_load, src_dos_code, src_kernal_err
.import names_init
.import diag_init, diag_finish, diag_screen
.import parse_file_base
.import em_on, em_bad
.import cg_code, cg_len, cg_err
.import fl_err
.import sz_plan_code, sz_code_base
.import out_begin, out_section, out_end_section, out_byte, out_bytes
.import out_finish, out_abort, out_load, out_entry, out_start, out_err
.import gen_stub

FRAME_BASE      = $BF80           ; software frame area under CR=$0E
WRAPPER_LEN     = 66
CODE_ADDR       = PRG_ENTRY_ADDR + WRAPPER_LEN

.macro ON_CARRY target
        bcc :+
        jmp target
:
.endmacro

.macro ON_NONZERO target
        beq :+
        jmp target
:
.endmacro

.segment "LOADADDR"
        .word $1C01

.segment "EXEHDR"
        .word basic_end
        .word 10
        .byte $9E
        .byte "7181"
        .byte $00
basic_end:
        .word $0000

.segment "MAILBOX"
        .res MB_SIZE

.segment "STARTUP"
.export test_entry
test_entry:
        php
        sei
        ldx #MB_SIZE - 1
        lda #$00
@clr:   sta MB_BASE,x
        dex
        bpl @clr
        lda #MB_MAGIC0_VALUE
        sta MB_MAGIC0
        lda #MB_MAGIC1_VALUE
        sta MB_MAGIC1
        lda #MB_PROD_COMPILER
        sta MB_PRODUCER
        lda #MB_ST_RUNNING
        sta MB_STATUS

        jsr mmu_init
        jsr mmu_bank0
        lda #<name_src
        ldx #>name_src
        ldy #name_src_len
        jsr src_load
        cmp #$00
        ON_NONZERO fail_load           ; src_load returns A=0 on success

        jsr names_init
        lda #<name_src
        ldx #>name_src
        ldy #name_src_len
        jsr diag_init
        lda #$00
        sta diag_screen
        lda #$01
        sta em_on
        lda #<PRG_LOAD_ADDR
        sta out_load
        lda #>PRG_LOAD_ADDR
        sta out_load+1
        lda #<PRG_ENTRY_ADDR
        sta out_entry
        lda #>PRG_ENTRY_ADDR
        sta out_entry+1
        lda #WRAPPER_LEN
        jsr sz_plan_code             ; final code base for absolute fixups

        lda sz_code_base
        ldx sz_code_base+1
        jsr parse_file_base
        jsr diag_finish
        sta diag_count
        lda diag_count
        sta MB_DATA+0
        lda em_bad
        sta MB_DATA+1
        lda cg_len
        sta MB_DATA+2
        lda cg_err
        sta MB_DATA+3
        lda fl_err
        sta MB_DATA+4
        lda sz_code_base
        sta MB_DATA+6
        lda sz_code_base+1
        sta MB_DATA+7

        lda diag_count
        ON_NONZERO fail_diag
        lda em_bad
        ON_NONZERO fail_emit
        lda cg_err
        ON_NONZERO fail_emit
        lda fl_err
        ON_NONZERO fail_emit

        lda #<name_counter
        sta out_name_ptr
        lda #>name_counter
        sta out_name_ptr+1
        lda #name_counter_len
        sta out_name_len
        jsr emit_output
        bcs fail_out

        lda #<name_countb
        sta out_name_ptr
        lda #>name_countb
        sta out_name_ptr+1
        lda #name_countb_len
        sta out_name_len
        jsr emit_output
        bcs fail_out

        lda #MB_ST_PASS
        sta MB_STATUS
        jmp done

fail_diag:
        lda #2
        jmp fail_common
fail_emit:
        lda #3
        jmp fail_common
fail_out:
        lda emit_err
        sta MB_DATA+5
        lda #4
        jmp fail_common
fail_load:
        sta MB_DATA+5
        lda src_dos_code
        sta MB_DATA+6
        lda src_kernal_err
        sta MB_DATA+7
        lda #1
fail_common:
        sta MB_CODE
        lda #$00
        sta MB_CODE+1
        lda #MB_ST_FAIL
        sta MB_STATUS
done:  jsr mmu_shutdown
        plp
        rts

; Write one output pair with the same generated bytes. A/X = base name,
; out_name_len = length. C=1 on any output failure.
emit_output:
        lda out_name_ptr
        ldx out_name_ptr+1
        ldy out_name_len
        jsr out_begin
        ON_CARRY out_fail

        lda #<PRG_LOAD_ADDR
        sta out_start
        lda #>PRG_LOAD_ADDR
        sta out_start+1
        lda #<sec_stub
        ldx #>sec_stub
        ldy #4
        jsr out_section
        ON_CARRY out_fail
        lda #<gen_stub
        ldx #>gen_stub
        ldy #PRG_STUB_SIZE
        jsr out_bytes
        ON_CARRY out_fail
        jsr out_end_section
        ON_CARRY out_fail

        lda #<PRG_ENTRY_ADDR
        sta out_start
        lda #>PRG_ENTRY_ADDR
        sta out_start+1
        lda #<sec_start
        ldx #>sec_start
        ldy #5
        jsr out_section
        ON_CARRY out_fail
        lda #<wrapper
        ldx #>wrapper
        ldy #WRAPPER_LEN
        jsr out_bytes
        ON_CARRY out_fail
        jsr out_end_section
        ON_CARRY out_fail

        lda sz_code_base
        sta out_start
        lda sz_code_base+1
        sta out_start+1
        lda #<sec_code
        ldx #>sec_code
        ldy #4
        jsr out_section
        ON_CARRY out_fail
        lda #<cg_code
        ldx #>cg_code
        ldy cg_len
        jsr out_bytes
        ON_CARRY out_fail
        jsr out_end_section
        ON_CARRY out_fail
        jsr out_finish
        ON_CARRY out_fail
        clc
        rts
out_fail: lda out_err
        sta emit_err
        jsr out_abort
        sec
        rts

; The PRG's fixed entry, at $1C0D. It clears the mailbox, installs a frame
; base, calls the generated program body at CODE_ADDR, and reports `total`
; (the second local, FP-2) as MB_DATA.
wrapper:
        lda $FF00                  ; save CR, select RAM through $BFFF
        pha
        lda #$0E
        sta $FF00
        ldx #MB_SIZE - 1
        lda #$00
@clr:   sta MB_BASE,x
        dex
        bpl @clr
        lda #MB_MAGIC0_VALUE
        sta MB_MAGIC0
        lda #MB_MAGIC1_VALUE
        sta MB_MAGIC1
        lda #MB_PROD_PROGRAM
        sta MB_PRODUCER
        lda #MB_ST_RUNNING
        sta MB_STATUS
        lda #<FRAME_BASE
        sta FRAME_FP
        lda #>FRAME_BASE
        sta FRAME_FP+1
        jsr CODE_ADDR
        lda FRAME_BASE - 3
        sta MB_DATA
        pla
        sta $FF00                  ; restore the BASIC entry mapping
        lda #MB_ST_PASS
        sta MB_STATUS
        rts
.assert * - wrapper = WRAPPER_LEN, error, "counter wrapper length changed"
.assert CODE_ADDR < $4000, error, "generated code must stay below BASIC ROM"

.segment "ZEROPAGE"
out_name_ptr:   .res 2

.segment "RODATA"
name_src:       .byte "COUNTER.N8"
name_src_len = * - name_src
name_counter:   .byte "COUNTER"
name_counter_len = * - name_counter
name_countb:    .byte "COUNTB"
name_countb_len = * - name_countb
sec_stub:       .byte "STUB"
sec_start:      .byte "START"
sec_code:       .byte "CODE"

.segment "BSS"
diag_count:     .res 1
out_name_len:   .res 1
emit_err:       .res 1